Manual cleaning and soaking

• Pre-wash all grossly soiled items with cold-ambient running water.
• Fill sinks with warm water.
• Asepti Sonic is dosed at 4-20mL per litre
• For routine soils dose at 4-10mL per litre,
• For heavy soils such as orthopaedic sets, 10-20mL per litre.
• If pumping manually, swirl to mix. Automatic dispensers are available.
• Determine solution replacement cycle and monitor.

Ultrasonic cleaning

• Dose Asepti Wash at 2mL to 10mL per litre.
• Dispensing via an automatic wall mounted unit is recommended.
• Determine solution replacement cycle and monitor.
• Asepti Sonic is supplied with two manual pumps delivering approximately 25mls per push.

Endoscope pre-cleaning and cleaning

• Prepare a fresh solution for each scope by diluting Asepti Sonic at 4-20 mL per litre at 30 – 50ºC.
• Soak disposable cloth in bath and wipe away visible soil from the insertion tube endoscope exterior.
• Place biopsy tip into solution and aspirate detergent through suction/biopsy channel. Remove tip from bath and alternate the suctioning of air and detergent until expelled solution is visibly clean.
• Completely immerse the endoscope in the bath. Whilst immersed brush all channels and exterior surfaces and then flush and fill all channels with Asepti Sonic solution.
• Rinse scope, channels, removable parts with water to remove all detergent residues prior to disinfection. Discard all used solutions and materials.
• Automatic Dispensers which control product use and concentration are available. Please contact Ecolab Healthcare for further information.

• UW565 Ultrasonic Cleaner
• Bandelin Sonorex
• Bandelin Sonomic
• Bandelin Triston
• Bandelin Sonoboard